Roll Bar Hanger Roll Lock Installation Aid
$45.00
Weight | 2.6 lbs |
---|---|
Dimensions | 10 × 10 × 3 in |
SKU:
23-RPHRL
Categories: Greenhouse Construction Materials, Greenhouse Hardware
Description
*Note this is not a permanent product, but rather an aid for installation.
Roll Pipe Hangers to fit over Roll Lock aluminum extrusion for installing 1.315″ OD pipe as roll bar. Set of 9 hangers to support 48 LF of pipe during install.
Reviews (0)
Be the first to review “Roll Bar Hanger Roll Lock Installation Aid” Cancel reply
Resources
FAQ
Related products
Greenhouse Zig Zag “Wiggle” Wire
$43.00 – $138.00
Our Greenhouse Zig Zag “Wiggle” Wire Insert is made from .085″ diameter, heavy duty, stainless steel spring wire. It is
Select options
This product has multiple variants. The options may be chosen on the product page
Greenhouse Shutter Motor
$135.00
6 Foot Aluminum H Channel for 8mm Polycarbonate
$13.50
6 Foot End Cap for 8mm Polycarbonate Sheets
$9.00
U Clamps
$0.26 – $110.00
Galvanized U-Clamps Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause
Select options
This product has multiple variants. The options may be chosen on the product page
End Wall Greenhouse 8mm Poly Lock
$15.00
Modine Effinity 93 Heater
$2,695.00 – $5,390.00
The Modine Effinity 93 series condensing unit heater offers the highest efficiency available in North America for commercial or industrial
Select options
This product has multiple variants. The options may be chosen on the product page
Modine PTP Heater
$1,405.00 – $2,175.00
The Modine PTP heater line is a horizontal power vented heater. The PTP delivers 80% thermal efficiency in a small
Select options
This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.