Hot
Greenhouse Curtain Motor – LVM60
$325.00
Weight | 9 lbs |
---|---|
Dimensions | 11 × 9 × 9 in |
Description
**This motor is designed to lift up to a 1250 sq. ft. single bar curtain or up to a 625 sq. ft. double bar curtain (square footage measured Length X Width)**
LVM60 motor only, single output
Automate using one of our environmental controllers or integrate into your existing system with one of our interface boxes.
Motor Specifications:Â 24 VDC, 60 NM, 3A, 72 W, 2.7 RPM, 40 Rev, 0.78″ (20mm) OD output shaft
Features
- Easy access limit switches (directional limits)
- Our innovative low-bind guide wheels for longer motor life
- Innovative roll bar adapter system for multiple roll bar adapters
- Our own U.S. based tech support & repair options at 1-877-546-2257
- 4 Year Limited Warranty for a lower total cost of ownership
- When used with one of our controllers or separate approved controller
Reviews (0)
Be the first to review “Greenhouse Curtain Motor – LVM60” Cancel reply
Resources
FAQ
You may also like…
AegisTEC+ Greenhouse Controller
$2,050.00
Roll Bar Adapters
$15.00 – $120.00
Select options
This product has multiple variants. The options may be chosen on the product page
Temperature Sensor for Greenhouse Controller
$60.00 – $90.00
Ventilation control greenhouse temperature sensor. For use with all Advancing Alternatives environmental controllers purchased 2010 or later. Choose from 100′
Select options
This product has multiple variants. The options may be chosen on the product page
Guide Pipe
$22.00 – $35.75
Select options
This product has multiple variants. The options may be chosen on the product page
Related products
LVM100 Greenhouse Curtain Motor
$425.00 – $460.00
Single output, low voltage, DC motor
Interchangeable guide wheel set to switch between Left and Right Output
Add an adapter for your roll bar by clicking through the options below!
Select options
This product has multiple variants. The options may be chosen on the product page
Crank Handles
$25.00 – $45.00
Crank Handles & Drill Cranks, with hook for loop input gears: 7:1, 13:1, and 15:1 Prop 65 WARNING: This product
Select options
This product has multiple variants. The options may be chosen on the product page
Guide Pipe Hardware
$14.00
Rollbar Adapter for LVM60/100 Motor – Fits 2.3″ Aluminum Roll Bar
$62.50
LVM-1802D-GW
$825.00
Reviews
There are no reviews yet.