Showing 25–36 of 37 results

Rollbar Adapter for Internal Brake Gears 2 Way – Fits 1″ OD Pipe

$37.50
2 directional roll bar adapter for 7:1, 13:1 and 15:1 gears. 1/2″ square shaft adapts to 1″ OD ( .9

Rollbar Adapter for LVM60/100 Motor – Fits 2.3″ Aluminum Roll Bar

$62.50
Roll bar adapter for 60 nm/100 nm motors and gc5:1b manual operator, adapts to 2.3″ aluminum roll bar, 1.5″ square

Rollbar Adapter for Hand Brake Gears – Fits 1″ OD Pipe

$35.00
Roll bar adapter for 5:1 and 10:1 gears. 5/8″ round shaft, adapts to 1″ OD (.91″ ID) roll bar pipe

Rollbar Adapter for Internal Brake Gears – Fits GGSI 1.5″ OD Pipe

$50.00
Roll bar adapter for 7:1, 13:1 and 15:1 gears.1/2″ square shaft adapts to GGSI 1.5″ OD aluminum roll bar, .750

Gear Chain Wheel Bracket/Keeper

$7.00
Chain keeper bracket used with Gear Chain wheels

96″ Manual Gear Crank 7:1 Gear Box

$240.00
96″ Manual Gear Crank, w/ 7:1 gear box & hand crank (max 500 SF curtain material)

Adapter for Internal Brake Gears 2 Way – Fits 2.3″ Roll-Bar

$105.00
2 directional roll bar adapter for 7:1, 13:1 and 15:1 gears. 1/2″ square shaft adapts to 2.3″ aluminum roll-bar, 1.5″

Low Voltage Cable Guide 6′

$55.00
Low Voltage Cable Guide, cable carrier to protect Low Voltage motor wires. Sold as 6′ section, includes one mounting clip.

LVM-1802D-GW

$825.00
180 NM dual-output motor with guide wheels, 24 V-DC, 200 Watt, 7.5 Amp, 4.5 RPM, 40 REV with 22 MM/.875″

Ring Terminal Connector M5 Stud Circular 14-16 AWG Crimp

$0.75
Ring Terminal Connector M5 Stud Circular 14-16 AWG Crimp

Rollbar Adapter for Hand Brake Gears – Fits 2.3″ Aluminum Roll Bar

$67.50
Roll bar adapter for 5:1 and 10:1 gears. 5/8″ round shaft, adapts to 2.3″ aluminum roll bar, 1.5″ square steel

Standard Recovery Diode, 600 V, 6 A, Single, 1.3 V, 2.5 ?s, 400 Amp

$2.75
Standard Recovery Diode, 600 V, 6 A, Single, 1.3 V, 2.5 µs, 400 Amp