Showing 13–24 of 37 results

LVM1002D With Guide Wheels

$550.00$620.00
Dual output, low voltage, DC motor Click through the options below to pick available roll bar adapters!
Select options This product has multiple variants. The options may be chosen on the product page

Guide Pipe

$22.00$35.75
7 foot, 1.3" OD, galvanized pipe
Select options This product has multiple variants. The options may be chosen on the product page

48″ Manual Gear Crank 7:1 Gear Box

$225.00
48″ Manual Gear Crank, w/ 7:1 gear box & hand crank (max 500 SF curtain material)

Gear Chain Wheel Crank 15:1 For Sidewall Curtains

$375.00
Gear Chain Wheel Assembly 15:1 ratio, 1/2 x 1/2 square output w/ 4 wheel guide assembly, 26′ chain and chain

Gear Loop Replacement

$8.00$12.00
Replacement Gear Loops for 7:1, 13:1, and 15:1
Select options This product has multiple variants. The options may be chosen on the product page

Gear Chain Wheel Crank 10:1 For Sidewall Curtains

$375.00
Gear Chain Wheel Assembly 10:1 ratio, 2 directional 5/8″ output shafts w/ 4 wheel guide assembly, 26′ chain and chain

Rollbar Adapter for Internal Brake Gears – Fits 1″ OD Pipe

$33.00
Roll bar adapter for 7:1, 13:1 and 15:1 gears. 1/2″ square shaft adapts to 1″ OD ( .9″ ID) roll

Guide Pipe Hardware

$14.00
Guide Pipe Hardware Assembly for securing guide pipe to structure or guide pipe extension; bolts, nuts, chain links

Rollbar Adapter for LVM180/200 Motor – Fits 2.3″ Aluminum Roll Bar

$67.50
Roll-bar adapter for 180 nm motor, adapts to 2.3″ aluminun roll bar, 1.5″ square steel insert

4′ Guide Pipe Extension

$40.00
Guide pipe extension, 4′ mounting post (improves guide pipe orientation on structures with curved sidewalls)

Rollbar Adapter for Internal Brake Gears – Fits 2.3″ Aluminum Roll-Bar

$66.00
Roll bar adapter for 7:1, 13:1 and 15:1 gears. 1/2″ square shaft adapts to 2.3″ aluminum roll-bar using a 1.5″

Rollbar Adapter for LVM60/100 Motor – Fits 1.5″ OD Pipe for Rack & Pinion

$55.00
Roll-bar adapter for 60 and 100 nm motor and GC5:1B manual operator, adapts to GGSI 1.5″ OD aluminum roll bar,